Turbocharger - BA09.40-P-1000-01X
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 139
TURBOCHARGER
| Number | Designation | Engine 133 | Engine 139 | ||
|---|---|---|---|---|---|
| BA09.40-P-1001-01X | Nut, exhaust gas turbocharger to exhaust manifold | Nm | 21 | - | |
| BA09.40-P-1002-01X | Clamp, turbocharger to exhaust system | Nm | 20 | 21 | |
| BA09.40-P-1003-01X | Screw, oil feed line to exhaust gas turbocharger/crankcase/cylinder head cover/holder | Nm | 9 | 8 | |
| BA09.40-P-1004-01X | Bolt, oil return line to turbocharger/crankcase/bracket | Nm | 9 | 8 | |
| BA09.40-P-1005-01X | Screw, coolant feed line to exhaust gas turbocharger/crankcase/holder/support | Nm | 9 | 8 | |
| BA09.40-P-1006-01X | Screw, coolant return flow line to exhaust gas turbocharger/holder/heat shield/oil return feed line | Nm | 9 | 8 | |
| BA09.40-P-1007-01X | Bolt, clamp between coolant feed/return lines | Nm | 9 | 8 | |
| BA09.40-P-1008-01X | Bolt, bracket for vent line | Nm | 20 | - | |
| BA09.40-P-1009-01X | Bolt, heat shield to bracket | Nm | 9 | 8 | |
| BA09.40-P-101001X | Screw/nut, bracket to cylinder head/bracket | Stage 1 | Nm | 20 | 21 |
| Stage 2 | ∠° | 90 | - | ||
| BA09.40-P-1011-01X | Screw/bolt, bracket to turbocharger | Nm | 20 | - | |
| BA09.40-P-1012-01X | Bolt, electronic bypass valve to turbocharger | Nm | 9 | - | |
| BA09.40-P-1013-01X | Exhaust gas turbocharger support to cylinder head cover | Nm | - | 8 | |
| BA09.40-P-1014-01X | Bolt, gas line to support for exhaust gas turbocharger | Nm | - | 8 | |
| BA09.40-P-1015-01X | Clamp, exhaust gas turbocharger to exhaust manifold | Nm | - | 21 | |
| BA09.40-P-1016-01X | Spacer bolt to exhaust gas turbocharger support | Nm | - | 10 | |
| BA09.40-P-1017-01X | Screw, coolant line to exhaust gas turbocharger electric motor control unit | Nm | - | 8 | |
| BA09.40-P-1018-01X | Screw, holder to exhaust gas turbocharger support | Nm | - | 8 | |
| BA09.40-P-1019-01X | Screw/bolt, bracket to turbocharger | Nm | - | 27 | |
| BA09.40-P-1020-01X | Clamp, turbocharger to exhaust system | Nm | - | 17 | |
| BA09.40-P-1021-01X | Screw, heat shield to support/cylinder head cover | Nm | - | 8 | |
| BA09.40-P-1022-01X | Screw, support to cylinder head cover/cylinder head | Nm | - | 8 | |
| BA09.40-P-1023-01X | Screw, heat shield for timing case cover/cylinder head/crankcase | Nm | - | 8 | |
| BA09.40-P-1024-01X | Bolt, heat shield bracket to crankcase | M6 | Nm | - | 8 |
| M8 | Nm | - | 20 | ||
| BA09.40-P-1025-01X | Screw, high-voltage line to exhaust gas turbocharger | Nm | - | 8 |