221 589 00 33 00 Puller - WS33.00-P-0177B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 164, 166, 169, 172, 177, 190, 197, 204, 207, 212, 216, 218, 221, 223, 230, 232, 243, 245, 247, 251, 292, 294, 295, 296, 297, 447, 448, 463, 464

Use in FG 32/33/40/46/Set B

Purpose :

Model 118, 169, 172, 177, 190, 204, 207, 212, 216, 218, 232, 245, 247, 294, 296

Puller for prying off the tie rod ball joint or ball head from the steering arm of the steering knuckle or the control arm.

Model 164, 166, 197, 221, 230, 251, 292

Puller for pressing the steering knuckle off the upper transverse control arm.

Model 447, 448

Puller for prying off/removing transverse control arm supporting joint from steering knuckle, W 163 589 03 43 00 press is not required for this.

Model 464

Puller for prying off/removing wheel studs from wheel hub.

Model 463

Puller for prying tie rod off steering knuckle.

Puller for prying off upper transverse control arm from steering knuckle.

Model 463 with code P94

Puller for prying off/removing wheel studs from wheel hub.

Puller for prying thrust arm off steering knuckle.

Puller for prying spring link off steering knuckle.

NOTE: In combination with:

W 163 589 03 43 00 press and W 221 589 00 33 03 repair spindle.

221 589 00 33 03 Repair spindle

Model 118, 164, 166, 169, 172, 177, 190, 197, 204, 207, 212, 216, 218, 221, 230, 245, 247, 251, 292, 447, 448, 463
Separate part
FG 32/33/35/40/46/Set B

WS33.00-P-0177-03B

Courtesy of MERCEDES-BENZ USA