Remove/Install Poly-V-Belt Tensioning Device - AR13.25-P-3220MFG
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139 in model 118, 177, 247
MODIFICATION NOTES
| 22.11.2019 | Document completely revised. |
Shown on removed alternator (G2)
Fig 1: Poly-V-Belt Tensioning Device Components Location - Engine 139 In Model 118 (Shown On Removed Alternator)
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Remove/install | |||
| 1 | Remove alternator (G2). | AR15.40-P-5032MFG | |
| 2 | Remove screws (2). | *BA13.25-P-1006-01Z | |
| 3 | Remove tensioning device (1). | ||
| 4 | Check tensioning device (1) for damage, wear and contamination. | If problems exist, ↓ Replace clamping device (1). |
|
| 5 | Install in the reverse order. |
BELT TENSIONING DEVICE
| Number | Designation | Engine 139 | |
|---|---|---|---|
| BA13.25-P-1006-01Z | Screw, belt tensioner to alternator | Nm | 20 |