LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> A220 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Exhaust System -- 118 Chassis) >> Torque Specifications >> Exhaust System >> Exhaust System - BA49.10-P-1000-02Q

Exhaust System - BA49.10-P-1000-02Q

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118 with engine 260, 282 

Model 177 with engine 260, 282 

Model 247 with engine 260, 282 

EXHAUST SYSTEM

Number Designation Model 118 with engine 260 Model 118 with engine 282.8
BA49.10-P-1001-02Q Clamp/nut, front exhaust system to exhaust gas turbocharger Nm 30 16
BA49.10-P-1002-02Q Bolt, upper front exhaust system holder to lifting eye/exhaust system Nm 25 -
BA49.10-P-1003-02Q Stud bolt/bolt, front exhaust system to crankcase Nm 25 -
BA49.10-P-1004-02Q Nut, front exhaust system to stud bolt M8 Nm 25 -
BA49.10-P-1005-02Q Bolt, lower holder for front exhaust system to oil pan/exhaust system Nm 25 -
BA49.10-P-1006-02Q Bolt, front exhaust system to center exhaust system M8 Nm 25 25
BA49.10-P-1007-02Q Nut, center exhaust system holder to front axle carrier M8 Nm 20 20
BA49.10-P-1008-02Q Clamp, rear exhaust system to center exhaust system Nm 23 23
BA49.10-P-1009-02Q Nut, elastomer bearing to rear reinforcement M8 Nm 20 25
BA49.10-P-1010-02Q Bolt, rear exhaust system bracket to body M8 Nm 20 20
BA49.10-P-1011-02Q Screw, control unit holder to front axle carrier Nm 5 5
BA49.10-P-1012-02Q Union nut, pressure line to gasoline particulate filter Nm 20 20
BA49.10-P-1013-02Q Clamp, catalytic converter to turbocharger Nm 16 -
BA49.10-P-1014-02Q Bolt, catalytic converter to bracket Nm - 25
BA49.10-P-1015-02Q Screw, catalytic converter holder to engine carrier M8 Nm - 25
BA49.10-P-1016-02Q Bolt, bracket for catalytic converter to crankcase M8 Nm - 20
EXHAUST SYSTEM

Number Designation Model 118 with engine 282.9 Model 177 with engine 260
BA49.10-P-1001-02Q Clamp/nut, front exhaust system to exhaust gas turbocharger Nm 21 30
BA49.10-P-1002-02Q Bolt, upper front exhaust system holder to lifting eye/exhaust system Nm - 25
BA49.10-P-1003-02Q Stud bolt/bolt, front exhaust system to crankcase Nm 13 25
BA49.10-P-1004-02Q Nut, front exhaust system to stud bolt M8 Nm 21 25
BA49.10-P-1005-02Q Bolt, lower holder for front exhaust system to oil pan/exhaust system Nm - 25
BA49.10-P-1006-02Q Bolt, front exhaust system to center exhaust system M8 Nm 25 25
BA49.10-P-1007-02Q Nut, center exhaust system holder to front axle carrier M8 Nm 20 20
BA49.10-P-1008-02Q Clamp, rear exhaust system to center exhaust system Nm 23 23
BA49.10-P-1009-02Q Nut, elastomer bearing to rear reinforcement M8 Nm 25 25
BA49.10-P-1010-02Q Bolt, rear exhaust system bracket to body M8 Nm 20 20
BA49.10-P-1011-02Q Screw, control unit holder to front axle carrier Nm 5 5
BA49.10-P-1012-02Q Union nut, pressure line to gasoline particulate filter Nm 20 20
BA49.10-P-1013-02Q Clamp, catalytic converter to turbocharger Nm - 16
BA49.10-P-1014-02Q Bolt, catalytic converter to bracket Nm - -
BA49.10-P-1015-02Q Screw, catalytic converter holder to engine carrier M8 Nm - -
BA49.10-P-1016-02Q Bolt, bracket for catalytic converter to crankcase M8 Nm - -
EXHAUST SYSTEM

Number Designation Model 177 with engine 282.8 Model 177 with engine 282.9
BA49.10-P-1001-02Q Clamp/nut, front exhaust system to exhaust gas turbocharger Nm 16 21
BA49.10-P-1002-02Q Bolt, upper front exhaust system holder to lifting eye/exhaust system Nm   -
BA49.10-P-1003-02Q Stud bolt/bolt, front exhaust system to crankcase Nm - 13
BA49.10-P-1004-02Q Nut, front exhaust system to stud bolt M8 Nm - 21
BA49.10-P-1005-02Q Bolt, lower holder for front exhaust system to oil pan/exhaust system Nm - -
BA49.10-P-1006-02Q Bolt, front exhaust system to center exhaust system M8 Nm 25 25
BA49.10-P-1007-02Q Nut, center exhaust system holder to front axle carrier M8 Nm 20 20
BA49.10-P-1008-02Q Clamp, rear exhaust system to center exhaust system Nm 23 23
BA49.10-P-1009-02Q Nut, elastomer bearing to rear reinforcement M8 Nm 25 25
BA49.10-P-1010-02Q Bolt, rear exhaust system bracket to body M8 Nm 20 20
BA49.10-P-1011-02Q Screw, control unit holder to front axle carrier Nm 5 5
BA49.10-P-1012-02Q Union nut, pressure line to gasoline particulate filter Nm 20 20
BA49.10-P-1013-02Q Clamp, catalytic converter to turbocharger Nm - -
BA49.10-P-1014-02Q Bolt, catalytic converter to bracket Nm 25 -
BA49.10-P-1015-02Q Screw, catalytic converter holder to engine carrier M8 Nm 25 -
BA49.10-P-1016-02Q Bolt, bracket for catalytic converter to crankcase M8 Nm 20 -
EXHAUST SYSTEM

Number Designation Model 247 with engine 260 Model 247 with engine 282.8
BA49.10-P-1001-02Q Clamp/nut, front exhaust system to exhaust gas turbocharger Nm 30 16
BA49.10-P-1002-02Q Bolt, upper front exhaust system holder to lifting eye/exhaust system Nm 25 -
BA49.10-P-1003-02Q Stud bolt/bolt, front exhaust system to crankcase Nm 25 -
BA49.10-P-1004-02Q Nut, front exhaust system to stud bolt M8 Nm 25 -
BA49.10-P-1005-02Q Bolt, lower holder for front exhaust system to oil pan/exhaust system Nm 25 -
BA49.10-P-1006-02Q Bolt, front exhaust system to center exhaust system M8 Nm 25 25
BA49.10-P-1007-02Q Nut, center exhaust system holder to front axle carrier M8 Nm 20 20
BA49.10-P-1008-02Q Clamp, rear exhaust system to center exhaust system Nm 23 23
BA49.10-P-1009-02Q Nut, elastomer bearing to rear reinforcement M8 Nm 25 25
BA49.10-P-1010-02Q Bolt, rear exhaust system bracket to body M8 Nm 20 20
BA49.10-P-1011-02Q Screw, control unit holder to front axle carrier Nm 5 2
BA49.10-P-1012-02Q Union nut, pressure line to gasoline particulate filter Nm 20 20
BA49.10-P-1013-02Q Clamp, catalytic converter to turbocharger Nm 16 -
BA49.10-P-1014-02Q Bolt, catalytic converter to bracket Nm - 25
BA49.10-P-1015-02Q Screw, catalytic converter holder to engine carrier M8 Nm - 25
BA49.10-P-1016-02Q Bolt, bracket for catalytic converter to crankcase M8 Nm - 20
EXHAUST SYSTEM

Number Designation Model 247 with engine 282.9
BA49.10-P-1001-02Q Clamp/nut, front exhaust system to exhaust gas turbocharger Nm 21
BA49.10-P-1002-02Q Bolt, upper front exhaust system holder to lifting eye/exhaust system Nm -
BA49.10-P-1003-02Q Stud bolt/bolt, front exhaust system to crankcase Nm 13
BA49.10-P-1004-02Q Nut, front exhaust system to stud bolt M8 Nm 21
BA49.10-P-1005-02Q Bolt, lower holder for front exhaust system to oil pan/exhaust system Nm -
BA49.10-P-1006-02Q Bolt, front exhaust system to center exhaust system M8 Nm 25
BA49.10-P-1007-02Q Nut, center exhaust system holder to front axle carrier M8 Nm 20
BA49.10-P-1008-02Q Clamp, rear exhaust system to center exhaust system Nm 23
BA49.10-P-1009-02Q Nut, elastomer bearing to rear reinforcement M8 Nm 25
BA49.10-P-1010-02Q Bolt, rear exhaust system bracket to body M8 Nm 20
BA49.10-P-1011-02Q Screw, control unit holder to front axle carrier Nm 5
BA49.10-P-1012-02Q Union nut, pressure line to gasoline particulate filter Nm 20
BA49.10-P-1013-02Q Clamp, catalytic converter to turbocharger Nm -
BA49.10-P-1014-02Q Bolt, catalytic converter to bracket Nm -
BA49.10-P-1015-02Q Screw, catalytic converter holder to engine carrier M8 Nm -
BA49.10-P-1016-02Q Bolt, bracket for catalytic converter to crankcase M8 Nm -
scientia non olet · About LEMON Manuals