Remove/Install Ambiance Illumination Control Unit - AR82.20-P-0001MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
with code 877 (Ambient lighting)
Shown on model 177
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Remove glove box. | AR68.10-P-1400MFA | |
| 3 | Release electrical connector (1) and disconnect. | ||
| 4 | Operate lock (2) and remove ambient lighting control unit (N162) from holder (3). | ||
| 5 | Install in the reverse order. | ||
| 6 | Commission ambient lighting control unit (N162). | If the ambient lighting control unit (N162) is replaced. | |
| AD00.00-P-2000-06MFA |