Cylinder Head - BA01.30-P-1000-01Y
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 260, 270, 274
CYLINDER HEAD
| Number | Designation | Engine 133 | Engine 260 | |||
|---|---|---|---|---|---|---|
| BA01.30-P-1001-01Y | Bolt, cylinder head to crankcase | M11 | Stage 1 | Nm | 20 | 10 |
| Stage 2 | Nm | 40 | 40 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| Stage 4 | ∠° | 90 | 90 | |||
| Stage 5 | ∠° | 90 | 90 | |||
| BA01.30-P-1002-01Y | Bolt, cylinder head to timing case cover | M8 | Nm | 20 | 20 | |
| BA01.30-P-1003-01Y | Bolt, front cover to cylinder head/cylinder head cover | M6 | Nm | 9 | 9 | |
| M8 | Nm | 19 | - | |||
| BA01.30-P-1004-01Y | Stud bolt for exhaust manifold | Nm | 13 | 11 | ||
| BA01.30-P-1005-01Y | Bolt, lifting eye at front right to cylinder head | M6 | Nm | - | - | |
| M8 | Nm | 20 | 20 | |||
| BA01.30-P-1006-01Y | Bolt, lifting eye at the rear left to cylinder head/cylinder head cover | M8 | Nm | 20 | 20 | |
| BA01.30-P-1007-01Y | Bolt, lifting eye at rear right to cylinder head/cylinder head cover | M8 | Nm | 20 | 20 | |
| BA01.30-P-1008-01Y | Bolt, lifting eye to cylinder head/cylinder head cover | M8 | Nm | - | - | |
| BA01.30-P-1009-01Y | Bolt, front air filter housing holder to cylinder head/cylinder head cover | M8 | Nm | - | - | |
CYLINDER HEAD
| Number | Designation | Engine 270 | Engine 274 | |||
|---|---|---|---|---|---|---|
| BA01.30-P-1001-01Y | Bolt, cylinder head to crankcase | M11 | Stage 1 | Nm | 10 | 10 |
| Stage 2 | Nm | 40 | 40 | |||
| Stage 3 | ∠° | 90 | 90 | |||
| Stage 4 | ∠° | 90 | 90 | |||
| Stage 5 | ∠° | 90 | 90 | |||
| BA01.30-P-1002-01Y | Bolt, cylinder head to timing case cover | M8 | Nm | 20 | 20 | |
| BA01.30-P-1003-01Y | Bolt, front cover to cylinder head/cylinder head cover | M6 | Nm | 9 | 9 | |
| M8 | Nm | 19 | - | |||
| BA01.30-P-1004-01Y | Stud bolt for exhaust manifold | Nm | 8 | 8 | ||
| BA01.30-P-1005-01Y | Bolt, lifting eye at front right to cylinder head | M6 | Nm | 9 | - | |
| M8 | Nm | 20 | - | |||
| BA01.30-P-1006-01Y | Bolt, lifting eye at the rear left to cylinder head/cylinder head cover | M8 | Nm | 20 | - | |
| BA01.30-P-1007-01Y | Bolt, lifting eye at rear right to cylinder head/cylinder head cover | M8 | Nm | 20 | - | |
| BA01.30-P-1008-01Y | Bolt, lifting eye to cylinder head/cylinder head cover | M8 | Nm | - | 20 | |
| BA01.30-P-1009-01Y | Bolt, front air filter housing holder to cylinder head/cylinder head cover | M8 | Nm | - | 20 | |