Crankcase Check Values - BE01.40-P-1000-04D
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139, 260, 264
CHECK VALUES FOR CRANKCASE
| Number | Designation | Engine 139 | Engine 260 | ||
|---|---|---|---|---|---|
| BE01.40-P-1001-04D | Crankshaft bearing | Basic bore diameter | mm | 59, 000...59, 019 | 59, 000...59, 019 |
| Number 1 (blue) | mm | 59, 000...59, 006 | 59, 000...59, 006 | ||
| Number 2 (yellow) | mm | 59, 006...59, 013 | 59, 006...59, 013 | ||
| Number 3 (red) | mm | 59, 013...59, 019 | 59, 013...59, 019 | ||
| BE01.40-P-1002-04D | Basic bore width at fit bearing | mm | 19, 967...20, 000 | 19, 967...20, 000 | |
| BE01.40-P-1003-04D | Permissible out-of-roundness and conicity of basic bore | mm | 0, 03 | 0, 03 | |
CHECK VALUES FOR CRANKCASE
| Number | Designation | Engine 264 | ||
|---|---|---|---|---|
| BE01.40-P-1001-04D | Crankshaft bearing | Basic bore diameter | mm | 59, 000...59, 019 |
| Number 1 (blue) | mm | 59, 000...59, 006 | ||
| Number 2 (yellow) | mm | 59, 006...59, 013 | ||
| Number 3 (red) | mm | 59, 013...59, 019 | ||
| BE01.40-P-1002-04D | Basic bore width at fit bearing | mm | 19, 967...20, 000 | |
| BE01.40-P-1003-04D | Permissible out-of-roundness and conicity of basic bore | mm | 0, 03 | |