000 588 26 62 00 Removal Fixture - WS01.00-P-0265B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine All (CAR, Heavy transporter, Light transporter)
Use in FG 01/Set B
Purpose:
Engine removal device for installing/removing engines.
NOTE:
The removal fixture consists of a C-bracket with a support beam and shackles.
In combination with a suitable lifting gear (e.g.: Overhead crane, fork-lift truck, boom crane and load tilter).
In combination with a suitable lifting gear (e.g.: Overhead crane, fork-lift truck, boom crane and load tilter).
Procurement information:
This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
Manufacturer
Erwin Schairer GmbH
Keltenstrasse 9
72469 Messtetten, Germany
Germany
http://www.erwinschairer.de
- Type/model: Engine removal device WBM 0304.01 Article no.: 100