000 588 25 62 00 Lift Table - WS01.00-P-0264A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine All (4xWD, CAR, Heavy transporter, Light transporter, smart)
Use in FG 01/03/08/25/26/27/32/33/35/46/47/49/54/61/77/set B
Purpose:
Lift table for installing and removing major assemblies.
Procurement information:
This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).
NOTE:
Please observe the manufacturer specific accessories.
Manufacturer 1:
BlitzRotary GmbH
Hufinger Str. 55
78199 Braunlingen
Germany
http://rotary.blitzrotary.com
- Type/model: Master Gear 1.0 (1.0 t) Article no.: 114855
- Accessories: major assembly mount (one point) Article no.: 103544
- Accessories: major assembly mount (universal) Article no.: 107856
Manufacturer 2
HPC Maschinenbau GmbH & Co. KG
Dibbetweg 32
31855 Aerzen-Gros Berkel
Germany http://gruse.de
- Type/model: MRT 1000 (1.0 t) Article no.: 8010000
- Accessories: major assembly mount (one point) Article no.: 80084
- Accessories: major assembly mount (universal) Article no.: 80094