450 589 00 13 00 Tightening Angle With Magnet - WS00.00-P-0132C
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 156, 176, 246 with engine 133, 270, 607
Model 118, 177, 247 with engine 260, 282, 608
Model 177, 192, 206, 232, 254 with engine 139
Model 205 with engine 274, 626
Model 450, 452
Model 453 with engine 281
Use in FG 00/01/03/05/Set B/C
Purpose:
Rotation angle with magnet for checking the rotation angle when tightening screws and nuts.
Tightening angle with magnet for tightening to 2nd stage of crankshaft bearing cap screws in engine 607 and 2nd stage of connecting rod bolts in engine 608.
Procurement information:
This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.