163 589 03 43 00 Press - WS00.00-P-0057Z

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All (CAR, Light transporter)

Use in FG 00/01/33/46

Purpose:

Hydraulic press for pressing out axle joints, e.g. upper ball joint and supporting joint.

NOTE: Do not exceed max. torque of 25 Nm at the spindle of the press.

In combination with W 163 589 01 43 00 Padding for model 163.

Courtesy of MERCEDES-BENZ USA