Install Windshield - AR67.10-P-1503-01P
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 156, 169, 171, 172.4, 176, 177, 203, 205, 207, 209, 211.0/2/6, 212, 213, 217, 218, 222, 230.4, 231, 238, 242, 243, 245.2, 246, 247, 253, 292, 293, 414.700
Model 463
as of model year 2019
| Notes on safety-relevant components | Model 117, 118, 156, 169, 171, 172.4, 176, 177, 203, 205, 207, 209, 211.0/2/6, 212, 213, 217, 218, 222, 230.4, 231, 238, 242, 243, 245.2, 246, 247, 253, 292 | AH00.00-Z-0019-01A |
- Open side window in driver door.
The side window must remain open during the curing time of the adhesive material.
Otherwise, back pressure will occur when closing a door, which presses the windshield (1) outward.
- Position both cup suction tools on outside of windshield (1).
- Together with a helper, center windshield (1) above windshield cutout in body flange and position congruent with tape strips (arrows).
- Position windshield (1) and press on until it rests on the rubber window spacers or the sealing lip.
Adhesion of adhesive material is otherwise impaired.
Observe the manufacturer's specifications for the curing time of the adhesive material.
Illustrated on model 169