Balancing Wheels - AR40.10-P-1040MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
| Risk of death. Death may occur if body parts are drawn into rotating vehicle parts. | Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access. | AS00.00-Z-0004-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Preparatory tasks | |||
| 1 | Remove wheel and tire assemblies. | AR40.10-P-1102MFA | |
| 2.1 | Remove balance weights using assembly tool. | For jammed balance weights. | |
| Fig 2 | |||
| 2.2 | Remove balance weights using removal tool. | For bonded balance weights. | |
| Fig 1 | |||
| Clean | |||
| 3 | Clean wheel and tire assemblies. | Remove any soiling from the complete wheel before balancing. Otherwise the measurement result will be falsified. |
|
| Balancing | |||
| 4 | Fasten wheel and tire assemblies to stationary balancing machine and balance them. | ||
| 000 588 29 21 00 Balancing machine | WS40.00-P-0076B | ||
| 5 | Install wheel and tire assemblies. | AR40.10-P-1102MFA | |
| 6 | Deactivate ESP®. | If dynamic balancing is required. | |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 7 | Balance wheel and tire assemblies with dynamic balancing machine on vehicle. | If dynamic balancing is required. Drive the complete wheels of the drive axle using the vehicle engine only. Otherwise the differential may be damaged. Only wheel and tire assemblies may be dynamically balanced that have undergone stationary balancing beforehand. The hood, vehicle doors, and the trunk lid or liftgate must be closed. |
|
| 8 | Activate ESP®. | If dynamic balancing takes place. |