LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> A220 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Wheels, Chassis Alignment -- 118 Chassis) >> Testing & Repair >> Attaching Mercedes-Benz Quick-Clamping Devices - AR40.20-P-0230SX

Attaching Mercedes-Benz Quick-Clamping Devices - AR40.20-P-0230SX

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 192, 197, 204, 205, 206, 207, 212, 213, 214, 216, 217, 218, 221.0/1, 222, 223, 232, 236, 242, 243, 246, 247, 253, 254, 292, 293, 294, 295, 296, 297 

Model 463 

as of model year 2019 

Shown on model 221 

G13658041Courtesy of MERCEDES-BENZ USA

Shown on model 221 

G16049316Courtesy of MERCEDES-BENZ USA
  Attach/remove     
1 Attach quick clamping devices (01) to front and rear wheels and remove tensioning levers. IMPORTANT Center mounting bell relative to wheel hub or rear axle shaft flange by locating the check pins in the five mounting holes (arrows) in the disk wheel.
SPECIAL TOOL Quick clamping device
Fig 1
2 Attach wheel mirrors or measurement pickups.    
Fig 1: Identifying Quick Clamping Device (124 589 01 31 00)
G13658043Courtesy of MERCEDES-BENZ USA