Diagnosis - SN00.30-P-0001-02S

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (CAR)

A XENTRY Diagnosis Kit 3 or XENTRY Diagnosis Kit 4 is essential for diagnostics on the STAR3 model series!

All diagnostic scopes of the STAR3 model series are available only to authenticated users.

Further information on this can be found in the XENTRY Portal at http://xentry.com/diagnosis-security-concept

XENTRY Diagnostics

The final XENTRY Diagnostics data relevant to market launch for modification year 2021-2 of the BR 223 model series will be available as of October 2021. It will be distributed via add-on for XENTRY Release 09/2021, as online and add-on supply for XENTRY Release 12/2021 will not begin until December 1, 2021.

The final XENTRY Diagnostics data relevant to market launch will be available for the BR 206 model series starting in mid-May 2021. It will be distributed via add-on for XENTRY Release 03/2021, as online and add-on supply for XENTRY Release 06/2021 will not begin until June 6, 2021.

It is recommended for workshops with fault-prone Wi-Fi connections to connect the XENTRY Diagnostics VCI to the XENTRY Diagnostics Pad or XENTRY Diagnostics Pad 2, as applicable, via the USB cable, especially in the case of control unit programming.

XENTRY Diagnostics Kit 4

XENTRY Diagnostics Kit 4 is the successor to XENTRY Diagnostics Kit 3 and has been available to order since September 1, 2020.

As usual, XENTRY Diagnostics Kit 4 consists of two components:

XENTRY Diagnostics Pad 2
XENTRY Diagnostics VCI

The device design is similar to that of the predecessor XENTRY Diagnostics Kit 3 but offers numerous advantages over it.