Remove/Install Mercedes-Benz Intelligent Drive Control Unit - AR54.21-P-0044MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 247
with code 233 (Adaptive cruise control Plus (DISTRONIC PLUS))
Fig 1: Mercedes-Benz Intelligent Drive Control Unit Components Location - Model 118 With Code 233 (Shown On Model 177)
Shown on model 177.0 with code 233 (Autonomous Intelligent Cruise Control Plus (DISTRONIC PLUS))
| Topical note | Notes on preventing damage to electronic components due to a magnetic tool | AH54.00-P-0002-01A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Remove right front seat. | AR91.10-P-1000MFA | |
| 3 | Remove right B-pillar trim. | AR68.30-P-4705MFA | |
| 4 | Remove floor covering (1) far enough until holder (4) is accessible. | ||
| 5 | Remove nuts (3). | ||
| 6 | Unhook holder (4) from stop plug (5). | ||
| 7 | Release and disconnect electrical connector. | This will result in damage to the electric lines and can impair their function. |
|
| 8 | Remove bolts_(7). | If the Mercedes-Benz Intelligent Drive control unit (N62/4) is replaced. | |
| 9 | Remove Mercedes-Benz Intelligent Drive control unit (N62/4) from holder (4). | If the Mercedes-Benz Intelligent Drive control unit (N62/4) is replaced. | |
| 10 | Install in the reverse order. | ||
| 11 | Commission Mercedes-Benz Intelligent Drive control unit (N62/4). | If the Mercedes-Benz Intelligent Drive control unit (N62/4) is replaced. | |
| AD00.00-P-2000-06MFA |