Remove/Install Head-Up Display - AR54.30-P-6400MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
with code 463 (Head-up display)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
| 2 | Remove instrument panel. | AR68.10-P-1000MFA | |
| 3 | Release and disconnect electrical connectors (1, 2). | ||
| 4 | Unscrew bolts (3). | ||
| 5 | Remove Head-up Display (A40/12) upwards. | ||
| 6 | Install in the reverse order | ||
| Initial startup | |||
| 7 | Commission Head-up Display (A40/12). | If the Head-up Display (A40/12) was replaced. | |
| AD00.00-P-2000-06MFA | |||
| Check | |||
| 8 | Check Head-up Display (A40/12) and adjust, if necessary. | AR54.30-P-6401MFA |