Remove/Install Augmented Reality Camera - AR54.30-P-0004MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
with code 21U (Video recording function (Dashcam))
Model 118, 177, 243, 247
with code U19 (Augmented reality video)
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove cover (1) | Fig 2 | |
| 2 | Release and disconnect electrical connectors (2) and remove from basic carrier. | ||
| 3 | Unhook spring clip (3) and remove augmented reality camera (B84/14). | Otherwise, soiling could lead to an augmented reality camera (B84/14) malfunction. |
|
| 4 | Install in the reverse order. | ||
| 5 | Perform commissioning of augmented reality camera (B84/14). | Model 118, 177, 243, 247 up to model year 2021 with code 21U (Video recording function (Dashcam)) with code U19 (Augmented reality video) If the augmented reality camera (B84/14) was replaced. |
|
| 000 588 11 21 00 Adjustment device | WS82.00-P-0151B | ||
| 000 588 00 23 00 Adjusting gauge | WS82.00-P-0028B | ||
| AD00.00-P-2000-06MFA | |||
| 6 | Calibrate augmented reality camera (B84/14). | ||
| 000 588 00 23 00 Adjusting gauge | WS82.00-P-0028B | ||
| 000 588 11 21 00 Adjustment device | WS82.00-P-0151B | ||
| AD00.00-P-2000-06MFA |