Program Control Unit - AR54.21-P-0014-01Y
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 129.058/063/067/076, 156, 163, 164, 166, 167, 168, 169, 170, 171.4, 176, 177, 192, 199, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 232, 236, 240, 242, 243, 245 (except 245.286), 246, 247, 251, 253, 254, 292, 294, 295, 296, 297, 450.3/4, 452.3/4, 454.0, 461
Program with XD-DVD
Model 463
up to model year 2013
Program with XD-DVD
The sequence descriptions are also shown updated in XENTRY.
- Start XENTRY and select vehicle model.
- Select control unit.
- Select menu item "Control unit adaptations".
- Select menu item "Control unit programming".
- Confirm notes on control unit programming specific to a single control unit.
- Select menu item "Online".
- Confirm procedure.
- Enter reason for control unit programming.
- Run through programming sequence based on menu indications in XENTRY.
- Rectify faults using test steps in "Fault messages" menu.
For communication errors between XENTRY and control unit.
If reason for fault is unable to be rectified,
↓
notify XENTRY Diagnosis User Help Desk.