Open/Close Coupling - AR54.10-P-0022-01FR

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 167, 177, 205, 206, 213, 214, 223, 232, 238, 247, 253, 257, 290 with code B01 (48V technology)

Model 223 with engine 177

with code ME10 (Hybrid vehicle (plug-in, PHEV))

except code B01 (48Vtechnology)

Model 254

with code B01 (48 V technology)

except code ME10 (Hybrid vehicle (plug-in, PHEV))

Open clutch

Slide catch spring (1) to position (B) (arrow C).
Never pull on the eyelet (arrow D).

Otherwise, the catch spring (1) will lose its pretension.
Detach degassing pipe (2).
Check sealing ring for damage.
If damage is present,

↓

Replace degassing pipe (2).

Courtesy of MERCEDES-BENZ USA

Close clutch
Slide catch spring (1) to position (A).
Slide on degassing pipe (2) until the catch spring (1) latches into place.
Check connection by tugging lightly on degassing pipe (2).