(Check Charging Cable And Vehicle Socket - AP54.10-P-5458E)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 247

with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

Model 118, 177, 247

with code ME10 (Hybrid vehicle (plug-in, PHEV))

Courtesy of MERCEDES-BENZ USA

Shown on model 177.086 with code ME08 (Hybrid drive 75-84 KW VARIANT (INCLUDING PLUG-IN))

	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
Notice	General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment		AH00.00-Z-0300-01A
Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Take charging cables (1a) and (1b) out of the vehicle.
	Check
2	Check entire length of charging cable (1a), plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage.	If problems are determined, ↓ replace charging cable (1a). After obtaining special order.
3	Check entire length of charging cable (1b), plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage.	If problems are determined, ↓ replace charging cable (1b). After obtaining special order.
	Install
4	Place charging cables (1a) and (1b) in vehicle.
	Check
5	Check charger feed socket (2) for damage.	If problems are determined, ↓ Replace charger feed socket (2). After obtaining special order.
6	Check that caps (3) are firmly seated on charger feed-in socket (2).	If problems are determined, ↓ Replace charger feed socket (2). After obtaining special order.
7	Check drain (4) for clear passage and soiling.	Remove any soiling. This is because water must not collect in the charger feed socket (2) area. If problems are determined, ↓ rectify the problems. After obtaining special order.
8	Check locks (5) by opening and closing caps (3).	If problems are determined, ↓ Replace charger feed socket (2). After obtaining special order.