Coolant Pump, Coolant Thermostat - BA20.10-P-1000-01AC
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 139, 260, 270, 274
COOLANT PUMP, COOLANT THERMOSTAT
| Number | Designation | Engine 133 | Engine 139 | ||
|---|---|---|---|---|---|
| BA20.10-P-1001-01AC | Screw, coolant pump to timing case/crankcase/oil pan | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | - | - | ||
| BA20.10-P-1002-01AC | Bolt, ball valve to coolant pump | Nm | 10 | - | |
| BA20.10-P-1003-01AC | Bolt, feed pipe to coolant pump | Nm | 10 | - | |
| BA20.10-P-1004-01AC | Bolt, lever to coolant pump | Nm | - | - | |
| BA20.10-P-1005-01AC | Bolt, vacuum unit bracket to coolant pump | Nm | - | - | |
| BA20.10-P-1006-01AC | Bolt, coolant thermostat to crankcase/cylinder head | Nm | 9 | 8 | |
| BA20.10-P-1007-01AC | Bolt, coolant pipe to crankcase/timing case | M8 | Nm | - | - |
| BA20.10-P-1008-01AC | Screw, coolant line to coolant pipe/cylinder head/crankcase/coolant thermostat/coolant hose/timing case | M6 | Nm | - | 8 |
| BA20.10-P-1009-01AC | Screw, coolant pump to coolant hose/coolant line | Nm | - | 8 | |
| BA20.10-P-1010-01AC | Screw, coolant thermostat to coolant hose | Nm | - | 8 | |
| BA20.10-P-1011-01AC | Screw/nut, charge air cooler circulation pump retaining bracket/circulation pump to holder | Nm | - | 8 | |
| BA20.10-P-1012-01AC | Bolt, housing for secondary coolant pump to crankcase | M6 | Nm | - | 8 |
| BA20.10-P-1013-01AC | Bolt, secondary coolant pump drive unit to crankcase | Stage 1 | Nm | - | 3 |
| Stage 2 | Nm | - | 6 | ||
| Stage 3 | ∠° | - | 45 | ||
| BA20.10-P-1014-01AC | Screw, coolant inlet fitting to coolant pump housing | Nm | - | 9 | |
| BA20.10-P-1015-01AC | Screw, water pump to coolant housing | Nm | - | 9 | |
| BA20.10-P-1016-01AC | Clamp, coolant pump to coolant hose/coolant line | Nm | - | 3 | |
| BA20.10-P-1017-01AC | Clamp, coolant hose/coolant line from coolant pump to connecting point | Nm | - | 2 | |
| BA20.10-P-1018-01AC | Clamp to medium temperature return line | Nm | - | 3 | |
| BA20.10-P-1019-01AC | Clamp, coolant hose/coolant line bypass to crankcase | Nm | - | 3 | |
| BA20.10-P-1020-01AC | Clamp, return line to exhaust gas turbocharger | Nm | - | 2 | |
| BA20.10-P-1021-01AC | Clamp to medium temperature bleed line | Nm | - | 2 | |
| BA20.10-P-1022-01AC | Screw, coolant line to coolant pump/coolant intake fitting | Nm | - | 8 | |
| BA20.10-P-1023-01AC | Screw, coolant line to engine carrier | Nm | - | 8 | |
| BA20.10-P-1024-01AC | Screw, coolant line to charge air cooler holder | Nm | - | 8 | |
| BA20.10-P-1025-01AC | Screw, holder to coolant thermostat/heat shield | M8 | Nm | - | 20 |
| M6 | Nm | - | 8 | ||
| BA20.10-P-1026-01AC | Nut/screw, electrical coolant pump retaining bracket | Nm | - | 8 | |
| BA20.10-P-1027-01AC | Screw, coolant pump holder to holder | Nm | - | 8 | |
| BA20.10-P-1028-01AC | Screw, holder for coolant line to timing case | Nm | - | 8 | |
| BA20.10-P-1029-01AC | Screw, holder for coolant line to crankcase | Nm | - | 8 | |
| BA20.10-P-1030-01AC | Screw, holder for coolant line to cylinder head | Nm | - | 8 | |
| BA20.10-P-1031-01AC | Nut, regulation valve for low-temperature circuit to holder | Nm | - | 10 | |
COOLANT PUMP, COOLANT THERMOSTAT
| Number | Designation | Engine 260 except code 9U8 (Control code - Major assembly technical further development) | Engine 260 with code 9U8 (Control code - Major assembly technical further development) | ||
|---|---|---|---|---|---|
| BA20.10-P-1001-01AC | Screw, coolant pump to timing case/crankcase/oil pan | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | - | 30 | ||
| BA20.10-P-1002-01AC | Bolt, ball valve to coolant pump | Nm | 10 | 10 | |
| BA20.10-P-1003-01AC | Bolt, feed pipe to coolant pump | Nm | 10 | 10 | |
| BA20.10-P-1004-01AC | Bolt, lever to coolant pump | Nm | - | - | |
| BA20.10-P-1005-01AC | Bolt, vacuum unit bracket to coolant pump | Nm | - | - | |
| BA20.10-P-1006-01AC | Bolt, coolant thermostat to crankcase/cylinder head | Nm | 8 | 8 | |
| BA20.10-P-1007-01AC | Bolt, coolant pipe to crankcase/timing case | M8 | Nm | - | - |
| BA20.10-P-1008-01AC | Screw, coolant line to coolant pipe/cylinder head/crankcase/coolant thermostat/coolant hose/timing case | M6 | Nm | - | - |
| BA20.10-P-1009-01AC | Screw, coolant pump to coolant hose/coolant line | Nm | - | - | |
| BA20.10-P-1010-01AC | Screw, coolant thermostat to coolant hose | Nm | - | - | |
| BA20.10-P-1011-01AC | Screw/nut, charge air cooler circulation pump retaining bracket/circulation pump to holder | Nm | 8 | 8 | |
| BA20.10-P-1012-01AC | Bolt, housing for secondary coolant pump to crankcase | M6 | Nm | - | - |
| BA20.10-P-1013-01AC | Bolt, secondary coolant pump drive unit to crankcase | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| Stage 3 | ∠° | - | - | ||
| BA20.10-P-1014-01AC | Screw, coolant inlet fitting to coolant pump housing | Nm | - | - | |
| BA20.10-P-1015-01AC | Screw, water pump to coolant housing | Nm | - | - | |
| BA20.10-P-1016-01AC | Clamp, coolant pump to coolant hose/coolant line | Nm | - | - | |
| BA20.10-P-1017-01AC | Clamp, coolant hose/coolant line from coolant pump to connecting point | Nm | - | - | |
| BA20.10-P-1018-01AC | Clamp to medium temperature return line | Nm | - | - | |
| BA20.10-P-1019-01AC | Clamp, coolant hose/coolant line bypass to crankcase | Nm | - | - | |
| BA20.10-P-1020-01AC | Clamp, return line to exhaust gas turbocharger | Nm | - | - | |
| BA20.10-P-1021-01AC | Clamp to medium temperature bleed line | Nm | - | - | |
| BA20.10-P-1022-01AC | Screw, coolant line to coolant pump/coolant intake fitting | Nm | - | - | |
| BA20.10-P-1023-01AC | Screw, coolant line to engine carrier | Nm | - | - | |
| BA20.10-P-1024-01AC | Screw, coolant line to charge air cooler holder | Nm | - | - | |
| BA20.10-P-1025-01AC | Screw, holder to coolant thermostat/heat shield | M8 | Nm | - | - |
| M6 | Nm | - | - | ||
| BA20.10-P-1026-01AC | Nut/screw, electrical coolant pump retaining bracket | Nm | - | - | |
| BA20.10-P-1027-01AC | Screw, coolant pump holder to holder | Nm | - | - | |
| BA20.10-P-1028-01AC | Screw, holder for coolant line to timing case | Nm | - | - | |
| BA20.10-P-1029-01AC | Screw, holder for coolant line to crankcase | Nm | - | - | |
| BA20.10-P-1030-01AC | Screw, holder for coolant line to cylinder head | Nm | - | - | |
| BA20.10-P-1031-01AC | Nut, regulation valve for low-temperature circuit to holder | Nm | - | - | |
COOLANT PUMP, COOLANT THERMOSTAT
| Number | Designation | Engine 270 | Engine 274 | ||
|---|---|---|---|---|---|
| BA20.10-P-1001-01AC | Screw, coolant pump to timing case/crankcase/oil pan | Stage 1 | Nm | 20 | 20 |
| Stage 2 | ∠° | - | - | ||
| BA20.10-P-1002-01AC | Bolt, ball valve to coolant pump | Nm | 10 | 10 | |
| BA20.10-P-1003-01AC | Bolt, feed pipe to coolant pump | Nm | 10 | 10 | |
| BA20.10-P-1004-01AC | Bolt, lever to coolant pump | Nm | 10 | 10 | |
| BA20.10-P-1005-01AC | Bolt, vacuum unit bracket to coolant pump | Nm | 10 | 10 | |
| BA20.10-P-1006-01AC | Bolt, coolant thermostat to crankcase/cylinder head | Nm | 9 | 9 | |
| BA20.10-P-1007-01AC | Bolt, coolant pipe to crankcase/timing case | M8 | Nm | - | 20 |
| BA20.10-P-1008-01AC | Screw, coolant line to coolant pipe/cylinder head/crankcase/coolant thermostat/coolant hose/timing case | M6 | Nm | - | 9 |
| BA20.10-P-1009-01AC | Screw, coolant pump to coolant hose/coolant line | Nm | - | - | |
| BA20.10-P-1010-01AC | Screw, coolant thermostat to coolant hose | Nm | - | - | |
| BA20.10-P-1011-01AC | Screw/nut, charge air cooler circulation pump retaining bracket/circulation pump to holder | Nm | - | - | |
| BA20.10-P-1012-01AC | Bolt, housing for secondary coolant pump to crankcase | M6 | Nm | - | - |
| BA20.10-P-1013-01AC | Bolt, secondary coolant pump drive unit to crankcase | Stage 1 | Nm | - | - |
| Stage 2 | Nm | - | - | ||
| Stage 3 | ∠° | - | - | ||
| BA20.10-P-1014-01AC | Screw, coolant inlet fitting to coolant pump housing | Nm | - | - | |
| BA20.10-P-1015-01AC | Screw, water pump to coolant housing | Nm | - | - | |
| BA20.10-P-1016-01AC | Clamp, coolant pump to coolant hose/coolant line | Nm | - | - | |
| BA20.10-P-1017-01AC | Clamp, coolant hose/coolant line from coolant pump to connecting point | Nm | - | - | |
| BA20.10-P-1018-01AC | Clamp to medium temperature return line | Nm | - | - | |
| BA20.10-P-1019-01AC | Clamp, coolant hose/coolant line bypass to crankcase | Nm | - | - | |
| BA20.10-P-1020-01AC | Clamp, return line to exhaust gas turbocharger | Nm | - | - | |
| BA20.10-P-1021-01AC | Clamp to medium temperature bleed line | Nm | - | - | |
| BA20.10-P-1022-01AC | Screw, coolant line to coolant pump/coolant intake fitting | Nm | - | - | |
| BA20.10-P-1023-01AC | Screw, coolant line to engine carrier | Nm | - | - | |
| BA20.10-P-1024-01AC | Screw, coolant line to charge air cooler holder | Nm | - | - | |
| BA20.10-P-1025-01AC | Screw, holder to coolant thermostat/heat shield | M8 | Nm | - | - |
| M6 | Nm | - | - | ||
| BA20.10-P-1026-01AC | Nut/screw, electrical coolant pump retaining bracket | Nm | - | - | |
| BA20.10-P-1027-01AC | Screw, coolant pump holder to holder | Nm | - | - | |
| BA20.10-P-1028-01AC | Screw, holder for coolant line to timing case | Nm | - | - | |
| BA20.10-P-1029-01AC | Screw, holder for coolant line to crankcase | Nm | - | - | |
| BA20.10-P-1030-01AC | Screw, holder for coolant line to cylinder head | Nm | - | - | |
| BA20.10-P-1031-01AC | Nut, regulation valve for low-temperature circuit to holder | Nm | - | - | |