108 589 00 76 00 Set Of Planishing Tools - WS60.00-P-0002K

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (CAR)

108 589 00 76 01 Plastic hammer	FG 60/set K	WS60.00-P-0002-01K
108 589 00 76 02 Hand dolly	FG 60/set K	WS60.00-P-0002-02K
108 589 00 76 03 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-03K
108 589 00 76 04 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-04K
108 589 00 76 05 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-05K
108 589 00 76 06 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-06K
108 589 00 76 07 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-07K
108 589 00 76 08 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-08K
108 589 00 76 09 Straightening and dressing hook	FG 60/set K	WS60.00-P-0002-09K
108 589 00 76 10 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-10K
108 589 00 76 11 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-11K
108 589 00 76 12 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-12K
108 589 00 76 13 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-13K
108 589 00 76 14 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-14K
108 589 00 76 15 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-15K
108 589 00 76 16 Straightening and dressing iron	FG 60/set K	WS60.00-P-0002-16K
108 589 00 76 17 Planishing lever	FG 60/set K	WS60.00-P-0002-17K
108 589 00 76 18 Planishing lever	FG 60/set K	WS60.00-P-0002-18K
108 589 00 76 19 Planishing lever	FG 60/set K	WS60.00-P-0002-19K
108 589 00 76 20 Square file	FG 60/set K	WS60.00-P-0002-20K
108 589 00 76 21 Plastic hammer	FG 60/set K	WS60.00-P-0002-21K

Use in FG 60/set K

Purpose:

Set of planishing tools for eliminating small dents and bumps.

NOTE: 1 set consists of 21 separate parts.

Procurement information:

This workshop equipment can be ordered directly through the regular replacement part ordering process at the GLC/LC.

Courtesy of MERCEDES-BENZ USA