000 588 43 23 00 Straightening Bench - WS60.00-P-0376K
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 156, 166 (except 166.8), 167 (except 167.9), 176, 177, 190, 197, 204, 205, 207, 212, 213 (except 213.1), 217, 218, 219, 231, 238, 242, 246, 247, 253, 257
Model 222 (except 222.1/9)
except code Z07 (B7 armoring on special protection version)
except code Z19 (Pullman government sedan)
except code Z31 (Pullman Guard government sedan)
Model 453
Model 463
Use in FG 60/61/62/63/64/Set K
Purpose:
Straightening bench for measuring and repair of vehicle bodies.
Test equipment category CAT_A.
NOTE:
Current data sheets can be obtained directly from the manufacturer.
Procurement information:
Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).
Manufacturer:
CAR-O-LINER AB
Hulda Mellgrens Gata 1
421 32 Vastra Frolunda
Sweden
http://www.car-o-liner.se
- Type/model: MB BenchRack 5000 Standard Article no.: 40216