Blockage Detection, Basic Function - GF82.00-P-1001A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All (CAR)
Overview
This document contains information on:
- General
- Function
General
Blockage detection protects the component parts involved against damage caused by a load that is too strong and enables the setting of end points during normalization.
Function
A blockage is detected if during the actuation of an electric motor:
- The rpm signal of the electric motor is absent
- A force defined in the system is exceeded
The power consumption of the electric motor serves as a reference for the force.
Once a blockage is detected, actuation of the electric motor is immediately stopped.
Depending on the system, the actuation of the electric motor is reversed for a certain time or a certain way.