Rear Axle Stabilizer Bar - BA32.35-P-1000-03A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
MODIFICATION NOTES
| 21.01.2019 | Value changed: Nut, torsion bar linkage to stabilizer bar | ||
| 29.01.2021 | Value changed: Nut, torsion bar linkage to spring link. | Model 243 |
REAR AXLE STABILIZER BAR
| Number | Designation | Model 243 | Model 118, 177, 247 | ||||
|---|---|---|---|---|---|---|---|
| BA32.35-P-1001-03A | Screw/nut, stabilizer to rear axle carrier | M8 | Stage 1 | Nm | 70 | 30 | |
| Stage 2 | Loosen | ∠° | 180 | ||||
| Stage 3 | Nm | - | 18 | ||||
| Stage 4 | ∠° | - | 45 | ||||
| BA32.35-P-1002-03A | Nut, torsion bar linkage to stabilizer bar | M10 | Nm | 80 | 80 | ||
| BA32.35-P-1003-03A | Nut, torsion bar linkage to wheel carrier | M10 | Stage 1 | Nm | - | 45 | |
| Stage 2 | ∠° | - | 45 | ||||
| BA32.35-P-1004-03A | Nut, torsion bar linkage to spring link. | M12 | Nm | 60 | - | ||