203 589 00 14 00 Sleeve - WS28.00-P-0076C
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 156, 176, 203.08/09/28/29, 205, 211.08/09/28/29, 213, 220.08/18, 238, 242, 246, 253, 257, 290, 293
Model 118, 177, 247 with transmission 724.0
Model 118, 177, 247 with transmission 724.1
Model 461.339 with code ZD4 (Vehicle for non-civilian operations)
Model 463.234 with code ZQ0 (G 500 4x4 2 )
Use in FG 27/28/33/35/Set C
Purpose:
Press in tapered roller bearing using sleeve (hollow shaft).
Model 117, 156, 176, 242, 246:
Sleeve for assembling output shaft.
Model 177:
Sleeve for assembling output shaft.
Model 205, 213, 238, 253, 257, 290:
For extracting and pulling in spring link bushing.
Model 461.339, model 463.234:
Sleeve for pressing cylindrical roller bearing into portal housing.