Deactivate Transport Mode Prior To Vehicle Delivery - AR54.00-P-0001MFA

Model 118, 177, 243, 247 

Courtesy of MERCEDES-BENZ USA

Shown here are the different system states in the instrument cluster with an active transport mode (Display always in English) 

	Check
1	Switch on ignition (circuit 15) and check if the "Transport mode" message is shown in the instrument cluster.	Deactivate the transport mode during the delivery inspection procedure before vehicle handover to the customer. Make sure that the instrument cluster shows the "Battery OK" (A) message before the deactivation. Activation is only possible up to a total distance for the vehicle of up to 350 km. If the transport mode is no longer active, ↓ activate transport mode in the central controller unit (N10) again using the vehicle diagnosis system in the menu item "Actuation".
			AD00.00-P-2000-06MFA
2	Charge battery.	If "Charge battery" (B) message is shown on the instrument cluster.
		Model 118, 177, 247	AR54.10-P-1130MFA
		Model 243	AR54.10-P-1130EQA
3	Replace battery.	If "Replace battery" (C) message is shown on the instrument cluster.
		Model 118, 177, 247 except code B01 (48V technology)	AR54.10-P-0005MFA
		Model 243	AR54.10-P-0005EQA
		Model 118, 177, 247 with code B01 (48V technology)	AR54.10-P-1134MFI
4	Document the residual service life shown on the instrument cluster.
		Model 118, 177, 247	AP00.20-P-1100B
		Model 243	AP00.20-P-1100D
	Deactivation
5	Deactivate transport mode using button combination.		AR54.00-P-0001-01A
6	Document deactivation of transport mode.
		Model 118, 177, 247	AP00.20-P-1100B
		Model 243	AP00.20-P-1100D