Remove/Install Mirror Glass - AR88.70-P-9020MFA

Model 118, 177, 247 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by irritation of the skin, eyes and respiratory system through contact or inhalation of substances contained in the mirror lens.	Wear protective gloves and safety glasses.	AS60.00-Z-0008-01R
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Carefully unclip mirror glass (1)	Carefully unclip mirror glass (1). It can otherwise break. Ensure correct engagement of all retaining clips (2).
		Long wedge Check retaining clips (2) for damage. ↓ Replace mirror glass (1) in case of damage.	Fig 1
2	Expose electrical wiring harness at mirror glass(1) and release and disconnect electrical connectors at mirror glass (1)	The number of electrical connectors varies according to vehicle equipment.
3	Install in the reverse order

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA