Restart Tire Pressure Monitor (TPM) - AR54.30-P-1001-01LWG

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

up to model year 2019

with code 475 (Tire pressure monitoring system)

Model 253

up to model year 2020

with code 475 (Tire pressure monitoring system)

Switch on ignition.
Use system selection button (S110s3) to call up list of menus.
Use scroll forward/back buttons (S110s1) to select "Service" menu.
OK button. (S110s6) press.
Use scroll forward/back buttons (S110s1) to select "Tire pressure".
OK button. (S110s6) press.
In the multifunction display (A1p13), the current tire pressures or the note "Tire pressure display appears after driving for a few minutes" are displayed.
Press scroll forward/back button (S110s1).
The note "Adopt current pressures as new guideline values" is shown in the multifunction display (A1p13).
OK button. (S110s6) press.
The note "Tire pressure monitoring restarted" is shown in the multifunction display (A1p13). After a few minutes' driving the tire pressures are displayed and monitored.
Switch off ignition.

Courtesy of MERCEDES-BENZ USA