LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> SLC43 AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Interior Equipment - 213 Chassis) >> Testing & Repair >> Detach/Attach A-Pillar Trim - AR68.30-P-4050-03LWA

Detach/Attach A-Pillar Trim - AR68.30-P-4050-03LWA

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.0/1/2/3, 213, 253, 293 

G07070400Courtesy of MERCEDES-BENZ USA
G07304504Courtesy of MERCEDES-BENZ USA
  1. Unclip cover (2) with SPECIAL TOOL clip remover.
  2. Detach edge guard (3) in area of A-pillar paneling (1).

    INSTALLATION IMPORTANT : Ensure that edge guard (3) is seated correctly.

  3. Unclip A-pillar trim (1) using SPECIAL TOOL long wedge at retaining clip (4) and retaining clamp (5).
  4. Slightly pivot A-pillar paneling (1) at top toward inside and remove toward rear out of instrument panel.
  5. Install in the reverse order.
    Fig 1: A-Pillar Trim Component Location - Model 213
    G12824291Courtesy of MERCEDES-BENZ USA