000 588 13 23 00 Straightening Bench - WS60.00-P-0138K

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 118, 156, 166, 167, 176, 177, 190, 197, 204, 205, 207, 212, 213, 217, 218, 219, 231, 238, 242, 246, 247, 253, 257 Model 222

except code Z07 (B7 armoring on special protection version)

except code Z19 (Pullman government sedan)

except code Z31 (Pullman Guard government sedan) Model 453

Model 463

Model 470, 471

Model 907

except code IR6 (Wheelbase 4325 mm, overhang 1615 mm)

except code IR7 (Wheelbase 4325 mm, overhang 2015 mm)

Model 910

Use in FG 60/61/62/63/64/Set K

Purpose:

Straightening bench for measuring and repair of vehicle bodies.

Test equipment category CAT_A.

Reference information :

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Current data sheets can be obtained directly from the manufacturer.

Manufacturer:

CAR-O-LINER AB

Hulda Mellgrens Gata 1

421 32 Vastra Frolunda

Sweden

http://www.car-o-liner.se

Type/model: MB BenchRack 5500 Standard
Article no.: 40217