Electrical Function Schematic For Starting The Hybrid Drive System - PE08.30-P-2056-97FBH
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 274.920 in model 205.047/147/247, 253.954 Engine 274.920 in model 253.354 Engine 651.921 in model 205.012/212
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Circuit 15, status | 16C |
| 1 | Circuit 15, status | 10F |
| 10 | Wet clutch, status | 6G |
| 11 | Wet clutch, request | 4G |
| 12 | Hybrid drive system, status | 16G |
| 12 | Hybrid drive system, status | 11G |
| 13 | Hybrid drive system READY, message | 22C |
| 13 | Hybrid drive system READY, message | 12H |
| 13 | Hybrid drive system READY, message | 19D |
| 2 | Hybrid drive system ON, request | 19G |
| 2 | Hybrid drive system ON, request | 26K |
| 2 | Hybrid drive system ON, request | 13H |
| 3 | Electric machine temperature, signal | 23H |
| 4 | Electrical machine rotor position, signal | 23F |
| 5 | Electric machine RPM, signal | 23F |
| 6 | Electric machine, status | 16G |
| 6 | Electric machine, status | 11G |
| 7 | High-voltage battery voltage, signal | 16J |
| 7 | High-voltage battery voltage, signal | 10G |
| 8 | High-voltage battery temperature, signal | 16J |
| 8 | High-voltage battery temperature, signal | 11G |
| A1 | Instrument cluster | 22A |
| A100 | High-voltage battery module | 29D |
| A100 | High-voltage battery module | 29G |
| A100 | High-voltage battery module | 29J |
| A100g1 | High-voltage battery | 29H |
| A100g1 | High-voltage battery | 30L |
| A79/1 | Electric machine | 25F |
| A79/1b1 | Electric machine temperature sensors | 25J |
| CAN C | Engine CAN | 11G |
| CAN C1 | Drive train CAN | 5G |
| CAN HM] | User interface CAN | 22D |
| CAN L | Hybrid CAN | 17G |
| CAN L | Hybrid CAN | 24J |
| Code ME04 | Hybrid drive 20 KW VARIANT | 7E |
| Code ME04 | Hybrid drive 20 KW VARIANT | 19F |
| Code ME04 | Hybrid drive 20 KW VARIANT | 27D |
| Code ME05 | HYBRID DRIVE 80 KW VARIANT (INCLUDING PLUGIN) | 7H |
| Code ME05 | HYBRID DRIVE 80 KW VARIANT (INCLUDING PLUGIN) | 19F |
| Code ME05 | HYBRID DRIVE 80 KW VARIANT (INCLUDING PLUGIN) | 27J |
| Code ME06 | Hybrid drive 50 KW VARIANT (INCLUDING PLUGIN) | 7H |
| Code ME06 | Hybrid drive 50 KW VARIANT (INCLUDING PLUGIN) | 19F |
| Code ME06 | Hybrid drive 50 KW VARIANT (INCLUDING PLUGIN) | 27G |
| Flex E | Chassis FlexRay | 17D |
| L20 | Electric machine rotor position sensor | 25F |
| N127 | Drivetrain control unit | 14G |
| N129/1 | Power electronics control unit | 21F |
| N3/10 | ME-SFI [ME] control unit | 8H |
| N3/9 | CDI control unit | 8F |
| N73 | Electronic ignition switch control unit | 20C |
| N82/2 | Battery management system control unit | 28F |
| N82/2 | Battery management system control unit | 30G |
| N82/2 | Battery management system control unit | 27L |
| Y3/8n4 | Fully integrated transmission control, control unit | 2G |