LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> SLC43 AMG >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Brakes - Hydraulic & Mechanical System - 205 Chassis) >> Basic Knowledge >> Electronic Stability Program Control Unit, Basic Function - GF42.45-P-9890A

Electronic Stability Program Control Unit, Basic Function - GF42.45-P-9890A

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (CAR) 

Show on model 293 

G12939329Courtesy of MERCEDES-BENZ USA

Shown on model 177 

G12939330Courtesy of MERCEDES-BENZ USA

Overview 

This document contains information on:

Location 

The ESP® control unit or regenerative brake system control unit is located in the engine compartment, next to the BAS brake booster on the traction system hydraulic unit. The traction system hydraulic unit is located in the engine compartment between the firewall and a heat shield.

Function 

The powertrain control unit primarily intervenes in the following functions:

In order to carry out these functions, the Electronic Stability Program control unit primarily processes the following input factors:

The Electronic Stability Program control unit processes these input factors and primarily transmits the following actuations: