Remove/Install Battery Sensor - AR54.10-P-0002W
Model 172
| Remove/install | |||
| Risk of fire
/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U gt= 30 V AC and U gt= 60 V DC. |
No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| Notes on battery | AH54.10-P-0001-01A | ||
| 1 | Disconnect ground line (1) from on-board electrical system battery (G1) | AR54.10-P-0003W | |
| 2 | Disconnect electrical connector (2) from battery sensor (B95) | 1 | |
| 3 | Detach ground line (1) on ground point on right front of battery (W10) | Counterhold pin on ground point on right front of battery (W10). Screw/bolt/nut, ground line of battery to body |
*BA54.10-P-1028-01C |
| 4 | Install in the reverse order |
BATTERY
| Number | Designation | Model 172 | ||
|---|---|---|---|---|
| BA54.10-P-1028-01C | Screw/bolt/nut, ground line of battery to body | M8 | Nm | 16 |