Remove/Install Backup Camera - AR54.65-P-0030WM
Model 172.4
with code 218 (Rear View Camera)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove trunk lid trim | ||
| 2 | Unclip electrical connector (2) from trunk lid | ||
| 3 | Release and disconnect electrical connector (2) | ||
| 4 | Release catch hooks (3) and pull out retaining clip (4) | ||
| 5 | Remove reversing camera (1) by pulling inward | ||
| 6 | Install in the reverse order | ||
| 7 | Perform commissioning of reversing camera (1) using diagnostic system | When replacing reversing camera (1). | |
| AD00.00-P-2000-04A |