Remove/Install 12V Socket At Front Of Vehicle Interior - AR54.10-P-1003EW
Model 172.4, 218
Model 204.9 as of model year 2013
Model 212
with Code 279 (Electronic gear selector)
Shown on model 212
Model 204.9 as of model year 2013
Fig 1: Front Vehicle Interior Power Outlet Components Location - Model 172.4 (Shown On Model 204.9 As Of Model Year 2013)
| Remove/install | |||
| 1 | Remove cover for center console | Model 172.4 | AR68.20-P-2000W |
| 2 | Remove storage compartment (1) | Model 172.4, 218 Model 204.9 as of model year 2013 Model 212 with CODE 279 (Electronic gear selector) Model 212.0 (except 212.074/077), 212.1, 212.2 (except 212.274/277) |
AR68.20-P-2420EW |
| Model 218 with CODE 279 (Electronic gear selector) | AR68.20-P-2420EL | ||
| 3 | Disconnect electrical connector (9) | Model 204.9 as of model year 2013 | |
| 4 | Detach electrical connection (10) in direction of arrow (arrow C) | Model 204.9 as of model year 2013 | |
| 5 | Detach connector (8) on stowage compartment (1) and unhook associated wiring harness (5) from the clip (7) | Model 172.4, 218 Model 212 with CODE 279 (Electronic gear selector) |
|
| 6 | Open cover on stowage compartment (1) | Model 172.4, 218 Model 212 with CODE 279 (Electronic gear selector) |
|
| 7 | Open the cover | ||
| 8 | Insert pliers (2) into the housing (3) and pull the housing (3) approx. 5 cm out of the spring pin (4) | ||
| Fig 2 | |||
| 9 | Unclip optical fiber (11) on stowage compartment (1) | Model 204.9 as of model year 2013 | |
| 10 | Unclip spring pin (4) from stowage compartment (1) by pushing back catch hook (arrows B) and remove front vehicle interior socket (X58/17) together with housing (3) and spring pin (4) | ||
| 11 | Install in the reverse order |