Retrofit COMAND® APS With DVD Changer - AN82.85-P-0004WA

MODEL 172.4## (except 172.475) 1# 

with CODE (527) COMAND® APS with single DVD drive (with navigation) 

except CODE (523) MB Audio 20 radio 

except CODE (510) Audio 20 with CD changer 

except CODE (494) USA version 

except CODE (498) Japan version 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove COMAND® controller unit (A40/3) with single DVD drive (with navigation)	: Install new COMAND® controller unit (A40/3) with DVD changer.	AR82.60-P-7502W
2	Install in the reverse order
3	Enter special equipment in online vehicle data card via vehicle documentation system (VeDoc)	Add:  Code (512) COMAND® APS with DVD changer Delete:  code (527) COMAND® APS with single DVD drive (with navigation system)
4	Document retrofitted equipment through VeDoc	Attach "COMAND® APS with DVD changer retrofitted, as per AN82.85-P-0004WA" note under the field organization texts to design group 82.
5	Connect Star Diagnosis and select vehicle via the vehicle identification number (VIN)
6	Run variant coding with XENTRY using software calibration number (SCN)
7	Disconnect Star Diagnosis
8	Perform function test	See operating instructions of COMAND® controller unit (A40/3) with DVD changer.