Press Deep-Groove Ball Bearing In/Out Of Elastomer Bearing Of Propeller Shaft - AR41.10-P-0100-02TX
Model 172, 204, 207, 212, 218, 219, 231
Courtesy of MERCEDES-BENZ USA
Press out
- Press out grooved ball bearing (8)
from rubber mount (7b) using press out/in tool (04a, 04b).
 Courtesy of MERCEDES-BENZ USA
|
Press in
- Press in grooved ball bearing (8)
into rubberized bearing seat as far as the contact surface (arrows) using press out/in tool (04a, 04b).
Ensure that the grooved ball bearing (8) is properly seated.
 Courtesy of MERCEDES-BENZ USA
|