Gap Dimensions For Vario Roof - BE77.30-P-1000-01A
Model 171.4, 172, 230, 231
MODIFICATION NOTES
| 8.6.15 | Value changed: Gap between rear shelf main flap and roll bar paneling | Model 172 |
TEST VALUES FOR VARIO ROOF GAP DIMENSIONS
| Number | Designation | Model 171.4 | Model 172 | ||
|---|---|---|---|---|---|
| BE77.30-P-1001-01A | Gap between rear shelf and roll bar | Dimension "A" | mm | - | - |
| BE77.30-P-1002-01A | Gap between main flap and rear shelf compensating strip | Dimension "A" | mm | - | - |
| BE77.30-P-1003-01A | Gap between rear shelf and side flap | Dimension "A" | mm | 6, 8...7, 8 | - |
| BE77.30-P-1004-01A | Gap for crossmember above windshield to Vario roof front section | Dimension "B" | mm | - | - |
| BE77.30-P-1005-01A | Gap between C-pillar top section and Vario roof front section | mm | 4, 5...5, 5 | - | |
| BE77.30-P-1006-01A | Gap between C-pillar upper section and rear window | mm | 6, 5 (±1, 5) | - | |
| BE77.30-P-1007-01A | Gap between rear shelf main flap and roll bar paneling | Dimension "B" | mm | 5, 3...6, 3 | 5, 5...7, 5 |
| BE77.30-P-1008-01A | Gap between side flap and upper center column paneling | Dimension "C" | mm | 4, 0...5, 5 | 4, 5...5, 5 |
| BE77.30-P-1009-01A | Gap between rear shelf main flap and upper center pillar paneling | Dimension "A" | mm | 5, 0...6, 0 | 4, 5...5, 5 |
| BE77.30-P-1010-01A | Gap between Vario roof front section and rear window | mm | 5, 5 (±1, 5) | - | |
| BE77.30-P-1011-01A | Transition (height offset) between C-pillar upper section and rear window | mm | 0, 0...1 | - | |
| BE77.30-P-1012-01A | Transition (height offset) between Vario roof front section and rear window | mm | 0, 0...2 | - | |
| BE77.30-P-1013-01A | Gap dimension between side flap and roll bar paneling and rear shelf | mm | - | 4, 5...5, 5 | |
TEST VALUES FOR VARIO ROOF GAP DIMENSIONS
| Number | Designation | Model 230 | Model 231 | ||
|---|---|---|---|---|---|
| BE77.30-P-1001-01A | Gap between rear shelf and roll bar | Dimension "A" | mm | 7, 0 (+3) | - |
| BE77.30-P-1002-01A | Gap between main flap and rear shelf compensating strip | Dimension "A" | mm | 3, 5 | - |
| BE77.30-P-1003-01A | Gap between rear shelf and side flap | Dimension "A" | mm | 5, 0 | 5, 0 |
| BE77.30-P-1004-01A | Gap for crossmember above windshield to Vario roof front section | Dimension "B" | mm | 5, 0 | - |
| BE77.30-P-1005-01A | Gap between C-pillar top section and Vario roof front section | mm | - | - | |
| BE77.30-P-1006-01A | Gap between C-pillar upper section and rear window | mm | - | - | |
| BE77.30-P-1007-01A | Gap between rear shelf main flap and roll bar paneling | Dimension "B" | mm | - | - |
| BE77.30-P-1008-01A | Gap between side flap and upper center column paneling | Dimension "C" | mm | - | - |
| BE77.30-P-1009-01A | Gap between rear shelf main flap and upper center pillar paneling | Dimension "A" | mm | - | - |
| BE77.30-P-1010-01A | Gap between Vario roof front section and rear window | mm | - | - | |
| BE77.30-P-1011-01A | Transition (height offset) between C-pillar upper section and rear window | mm | - | - | |
| BE77.30-P-1012-01A | Transition (height offset) between Vario roof front section and rear window | mm | - | - | |
| BE77.30-P-1013-01A | Gap dimension between side flap and roll bar paneling and rear shelf | mm | - | - | |