LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> SLC300 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 172 Chassis >> Maintenance >> Update map data status for COMAND navigation system - AP82.85-P-8252A

Update map data status for COMAND navigation system - AP82.85-P-8252A

MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463 

MODIFICATION NOTES

28.10.13 "Update of NTG 5.0" added    
  Prepare update     
1 Check whether a map data update is available to the customer free of charge * Map update
↓		  
REFER TO DESCRIPTION & OPERATION   Service Information: Free map updates for COMAND SI82.85-P-0019A
2 Activation code for map data update available in Vehicle Documentation (VeDoc) * not for USA
↓
* not for USA
↓		  
REFER TO DESCRIPTION & OPERATION   Service information: Copy protection in navigation unit with hard-disk navigation COMAND with copy protection SI82.85-P-0018A
3 Check state of charge (SOC) of the high-voltage battery MODEL 212.095/098/195/298
* not for USA
↓		  
REFER TO DESCRIPTION & OPERATION   Service Information: Programming of control units SI54.21-P-0008B
4 Open engine hood MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463  
REFER TO TESTING & REPAIR   MODEL 204.3, 207, 212
IMPORTANT MODEL 204.3, 207, 212
with CODE U60 (Active Bonnet (Pedestrian protection))
Moving the engine hood to the vertical position: 
Detach left and right clamping levers at the upper left and right hinges.		 AR88.40-P-1000EW
DANGER Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A
5 Connect battery charger    
NOTES Notes on battery   AH54.10-P-0001-01A
IMPORTANT Notes on AGM battery   AH54.10-P-0002-01A
    IMPORTANT Only switch on the charger after it has been connected!  
6 Switch ignition lock to position "1" (circuit 15R)    
7 Switch on COMAND controller unit    
8 Remove CDs or DVDs from the COMAND disc drive When updating using the master DVD  
9 Connect the Blu-ray player of the diagnostic system to the front USB connection ports of the COMAND control unit When updating using the master Blu-ray disc
IMPORTANT Alternatively, connect the master USB stick to the front USB connections of the COMAND control unit.
The option to update using Blu-ray is not available in every market. If no Blu-ray option is available:
↓
Carry out update using the master DVD or USB stick.		  
  Update     
10.1 Insert the master DVD and update map data MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463
When updating using the master DVD
IMPORTANT Enter the activation code provided in VeDoc and start with the update.
IMPORTANT Any error messages that may be displayed should be ignored.
The update process can take a while to complete. The progress bar indicates how much has been completed.
If there are multiple master DVDs, follow the instructions on the COMAND display.		  
10.2 Insert master Blu-ray disc into external Blu-ray player of XENTRY kit and update map data MODEL 205, 222
with CODE 531 (COMAND APS)
When updating using the master Blu-ray disc (for NTG 5.0)
IMPORTANT Enter the activation code provided in VeDoc and start with the update.
IMPORTANT The progress bar indicates how much has been completed.
The update version can subsequently be called up via "Navi", "Options" and "Map version".		  
10.3 Start the menu from the master USB stick and update the map data MODEL 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246, 463
When updating using the master USB stick (from NTG 4.5 onwards)
IMPORTANT Enter the activation code provided in VeDoc and start with the update.
IMPORTANT The update process can take a while to complete.
The progress bar indicates how much has been completed.		  
11.1 Remove all master DVDs from the vehicle and insert the previously removed CDs or DVDs MODEL 117, 156, 164, 166, 169, 172, 176, 197, 204, 205, 207, 212, 216, 218, 221, 222, 231, 242, 245, 246, 251, 463
After updating using the master DVD		  
11.2 Remove the master Blu-ray disc from the Blu-ray player and disconnect the front USB connectors MODEL 205, 222
After updating using the master Blu-ray disc (for NTG 5.0)		  
11.3 Remove USB stick from the front USB connections MODEL 117, 156, 166, 172, 176, 204, 205, 207, 212, 218, 222, 231, 242, 246, 463
After updating using the master USB stick (from NTG 4.5 onwards)		  
12 Switch off COMAND control unit    
13 Switch off ignition    
DANGER Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A
14 Disconnect battery charger    
NOTES Notes on battery   AH54.10-P-0001-01A
IMPORTANT Notes on AGM battery   AH54.10-P-0002-01A
    IMPORTANT Switch off charger before disconnecting!  
15 Close engine hood MODEL 117, 156, 164, 166, 171, 172, 176, 204, 205, 207, 212, 216, 218, 221, 222, 230, 231, 242, 246, 251, 463  
REFER TO TESTING & REPAIR   MODEL 204.3, 207, 212
IMPORTANT MODEL 204.3, 207, 212
with CODE U60 (Active Bonnet (Pedestrian protection))
Close engine hood: 
Mount left and right clamping levers at the upper left and right hinges.		 AR88.40-P-1000EW
scientia non olet · About LEMON Manuals