Remove/install interior paneling on roll bar - AR68.30-P-1380RK

MODEL 231 

Fig 1: Interior Paneling On Roll Bar Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Interior Paneling On Roll Bar Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear wall paneling		AR68.30-P-4750RK
2	Remove rear parking system warning display (A44/3)	Remove rear parking system warning display (A44/3) only until electrical connector (1) is accessible. Assembly wedge	Figure
3	Disconnect electrical connector (1)
4	Fold up roll bar covers (2) i direction of arrow (arrow B)
5	Remove bolt (3)
6	Remove bolts (4)
7	Remove interior paneling on roll bar (5) upward	Ensure that interior paneling is seated correctly on roll bar (5).
8	Install in the reverse order

Fig 3: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA