Remove/install side cover on center console - AR68.20-P-2355RK

MODEL 231 

Fig 1: Side Cover On Center Console Remove/Install Components (1 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 2: Side Cover On Center Console Remove/Install Components (2 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 3: Side Cover On Center Console Remove/Install Components (3 Of 3)

Courtesy of MERCEDES-BENZ USA

Shown on left side center console cover 

Fig 4: Side Cover On Center Console Remove/Install Component - Shown On Left Side Center Console Cover (1 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 5: Side Cover On Center Console Remove/Install Component - Shown On Left Side Center Console Cover (2 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 6: Side Cover On Center Console Remove/Install Component - Shown On Left Side Center Console Cover (3 Of 3)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Unclip trim (4) toward front (arrows a) and remove	When removing right side center console cover (2). Mounting wedge	Figure
2	Unclip cover (5) upward (arrow B) and remove	When removing right side center console cover (2).
3	Open rear luggage box cover (6)	When removing left side center console cover (1).
4	Remove paneling from rear center console stowage compartment (3)	Unclip paneling (3) from rear center console stowage compartment and pivot toward front (arrow C). Extend paneling (3) on rear center console stowage compartment toward front.
5	Unclip lower instrument cluster paneling (8) toward rear	When removing side center console cover on driver side. Install adjuster (14) in mount of instrument cluster. Ensure that adjuster (14) is seated correctly in lower instrument cluster paneling (8).
6	Unclip steering column tube module (9) from instrument panel (11) and push toward rear	When removing side center console cover on driver side. Removal:  Push steering column tube module cover (9) at side top toward inside (arrow D). The guides (12) on the steering column tube module (9) should reach into the openings (13).
7	Open glove compartment	When removing side center console cover on passenger side.
8	Remove left or right center console cover (1, 2) from center console	Unclip left or right center console cover (1, 2) starting from the middle in the sequence shown by the arrows (E1...E6).
9	Move left or right center console cover (1, 2) on rear part upward out of bracket (7) (arrow F).
10	Remove left or right center console cover (1, 2) from instrument panel	Removal:  Move left or right center console cover (1, 2) toward rear (arrows G) out of instrument panel. Ensure that retaining lugs are seated correctly in instrument panel (11).
11	Install in the reverse order

Fig 7: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA