Remove/install rear wall paneling - AR68.30-P-4750RK

MODEL 231 

Fig 1: Rear Wall Paneling Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Rear Wall Paneling Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear passenger compartment side trim panel		AR68.30-P-4780RK
2	Remove bolt (1)
3	Unclip paneling (2) and remove in direction of arrow (arrow A)
4	Disconnect electrical connectors (3)
5	Remove bolts (4)
6	Pull rear panel paneling (5) upward (arrow B) out of mounts	If necessary, mark present electrical connectors and disconnect.
7	Remove rear wall paneling (5)
8	Install in the reverse order