Wiring Diagram For Seat Heater Control Unit - PE91.30-P-2104-97SEA
Model 217 up to model year 2018 with code 432 (Dynamic seats left and right) Control unit N25/5
Model 222 up to model year 2018 with code 432 (Dynamic seats left and right) Control unit N25/5
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 23L |
| K40/6 | Left fuse and relay module | 4L |
| K40/6f203 | Fuse 203 | 2L |
| N25/5 | Driver seat heater control unit | 4A |
| N25/5 | Driver seat heater control unit | 12A |
| N25/5 | Driver seat heater control unit | 19A |
| N32/1 | Driver seat control unit | 11L |
| R13/1 | Left front seat sitting surface heated cushion | 15L |
| R13/1b1 | Left front seat sitting surface heater pad temperature sensor | 16L |
| R13/2 | Left front backrest heated cushion | 18L |
| R13/2b1 | Left front seat backrest heater pad temperature sensor | 18L |
| R13/3 | Right front seat sitting surface heated cushion | 15L |
| R13/3b1 | Right front seat sitting surface heater pad temperature sensor | 16L |
| R13/4 | Right front backrest heated cushion | 18L |
| R13/4b1 | Right front seat backrest heater pad temperature sensor | 18L |
| U12 | Valid for left-hand drive vehicles | 14C |
| U1222 | Valid for model series 222 | 8F |
| U13 | Valid for right-hand drive vehicles | 13D |
| U413 | Valid for model 217.3 | 8F |
| U414 | Valid for model 217.4 | 6F |
| W17/1 | Left rear seat ground point | 8H |
| W19 | Right front seat crossmember ground point | 8G |
| W85/2 | Front passenger footwell frame floor assembly ground point | 7G |
| X157/26 | Driver seat heater control unit ambiance illumination electrical connector | 1E |
| X54/37 | Left front seat backrest heater pad electrical connector | 17E |
| X54/38 | Right front seat backrest heater pad electrical connector | 17F |
| X55/29 | Left front seat surface heater pad electrical connector | 14E |
| X55/30 | Right front seat surface heater pad electrical connector | 14F |