Notes For Extinguishing Agent Tank Pressure Monitor Switch - AH86.10-P-0001-03A

Model 220.1/8 

with code Z04 (Light armoring) 

with code Z07 (B7 armoring on special protection version) 

with fire extinguishing system 

Model 221.1 

with code Z07 (B7 armoring on special protection version) 

with fire extinguishing system 

Model 222.1 

with code Z21 (Fire extinguishing system) 

Model 223 

with code Z07 (B7 armoring on special protection version) 

with code Z21 (Fire extinguishing system) 

Model 463.236/248 

with code 979 (Special protection MB Guard) 

with fire extinguishing system 

Model 220.1/8

with code Z04 (Light armoring)

with code Z07 (B7 armoring on special protection version)

with fire extinguishing system

Model 221.1

with code Z07 (B7 armoring on special protection version)

with fire extinguishing system

Model 463.236/248

with code 979 (Special protection MB Guard)

with fire extinguishing system

The extinguishing agent tank 1 pressure monitoring switch and extinguishing agent tank 2 pressure monitoring switch are closed when the operating pressure is as specified and should never be removed from the extinguishing agent tank, because otherwise the reservoirs would empty.

Model 222.1

with code Z21 (Fire extinguishing system)

Model 223

with code Z07 (B7 armoring on special protection version)

with code Z21 (Fire extinguishing system)

The extinguishing agent tank pressure monitoring switch is closed when the container pressure is correct, and this must not be removed from the extinguishing agent tank, as otherwise this will lead to the extinguishing agent tank being emptied.