Check High Pressure Fuel Lines - AR07.03-P-1010-03MNL
Engine 176 in model 217, 222
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |
Do not re-install damaged high-pressure lines (1).
Leaks in the fuel system and environmental damage may occur otherwise.
- Tighten union nut (1a) and thrust piece (1b) on the high-pressure line (1) to the rear.
- Clean sealing cone (1c) for high-pressure line (1).
- Determine not deformed area of the sealing cone (1c) using a feeler gauge.
The not deformed area arises from the distance from the first measuring point (1M) to the second point (2M).
If the size of the undeformed area is less than 1 mm
↓
Replace high-pressure line (1).