Remove/Install Right Turbocharger Heat Shield - AR09.40-P-6027-00MNM
Engine 177 in model 217, 222
TURBOCHARGER
| Number | Designation | Engine 177 | |
|---|---|---|---|
| BA09.40-P-1007-01ZA | Bolt, side heat shield to cylinder head cover | Nm | 9 |
INERTING
| Number | Designation | Model 217 | Model 222 | |||
|---|---|---|---|---|---|---|
| BA86.10-P-1002-03G | Pipe for inerting to engine | Screw | Nm | 8 | 8 | |
| Nut | Stage 1 | Nm | 8 | 8 | ||
| Stage 2 | ∠° | 30 | 30 | |||
- Remove screw/bolts (2)
.
- Remove heat shield (1) upwards.
- Install in the reverse order.