Wiring Diagram For Backup Camera Control Unit - PE54.65-P-2102-97SEA
Model 217, 222 as of model year 2018 with code 218 (Rear view camera) Control unit N66/2
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 23L |
| A26/17 | Head unit | 11L |
| CAN HMI | User interface CAN | 7K |
| Code 235 | Active Park Assist | 14A |
| K40/5 | Rear fuse and relay module | 3L |
| K40/5f468 | Fuse 468 | 2L |
| M35/2 | Rear camera cover motor | 17L |
| N10/8 | Rear SAM control unit | 16A |
| N66/2 | Backup camera control unit | 4A |
| N66/2 | Backup camera control unit | 11A |
| W6/1 | Left tail lamp trunk ground point | 3F |
| X18/35 | Cockpit wiring harness and frame floor assembly electrical connector | 7F |
| X30/20 | User interface CAN (CAN HMI) potential distributor electrical connector | 7L |