Wiring Diagram For Camera Cover Control Unit - PE54.21-P-2142-97SEA
Model 217 up to model year 2018 with code 218 (Rear view camera) with code 501 (360° camera) Control unit N42
Model 222 up to model year 2018 with code 218 (Rear view camera) with code 501 (360° camera) Control unit N42
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 15L |
| CAN B | Interior CAN | 7K |
| Code 501 | 360 degree camera | 9C |
| K40/5 | Rear fuse and relay module | 3L |
| K40/5f410 | Fuse 410 | 2L |
| M35/1 | Front camera cover motor | 10L |
| M35/2 | Rear camera cover motor | 13L |
| N42 | Camera cover control unit | 4A |
| N42 | Camera cover control unit | 12A |
| U1217 | Valid for model series 217 | 2E |
| U1222 | Valid for model series 222 | 2D |
| U413 | Valid for model 217.3 | 2D |
| U414 | Valid for model 217.4 | 2D |
| W54/3 | Left rear wheel well ground point | 3F |
| W6/1 | Left tail lamp trunk ground point | 3E |
| X30/33 | Right interior CAN (CAN B) potential distributor electrical connector | 7L |